What is stereo?




There are now two system of high fidelity, monophonic (monaural) and stereophonic. Monophonic is a system that starts from one microphone and is fed through a single high fidelity set. Stereophonic is a double system. Two separate microphones are placed at different sides of the orchestra and two different systems are used to keep the two signals or channels separated. Two separate speakers are used, placed on different sides of you room. Stereo is much like 3-D photography, two slightly different sound reach your ears giving you a new dimension in sound.




H.H. Scott '59





Copland CDA 823


The CDA823 is an evolution of the renowned CDA822 CD-player. While employing the same outstanding DACs and analog amplifiers as its predecessor, double resampling and reading speed are now introduced. Increased over-sampling of 192 kHz is used to avoid the loss of energy and transparency in a complex analog output filter. The CDA823 also allows for future updates of firmware through flash programmable microprocessors.

The CDA823 uses a true 24-bit, high-resolution, dual differential, digital to analog converter with current output for widest dynamic ranges, fast conversion and lowest noise. Jitter distortion arising from time errors is virtually eliminated by sample rate converters and our precision internal master-clock. All audio power supplies are multi-regulated. The output amplifiers are a priority in the design of this audiophile CD-player. Operational amplifiers with their fixed working conditions and sound qualities can become an obstacle when the designer wants to be in control of the final performance. Therefore, CDA823 employs discrete class-A input amplifiers with carefully selected operational points for the specific electronic environment in which they have to perform. The output circuitry provides both fully balanced and single ended outputs.

Frequency response: 20Hz-20kHz +/-0,1dB
S/N ratio ( IHF-A curve ): Better than 100dB
Phase linearity: Less than 0,2” (20Hz-20kHz)
Dynamic range: Better than 100dB
T.H.D.: Less than 0.01 %
D/A converter: 24 bit. Dual differential
Output Analog: Balanced and single ended : 2,0V RMS.
Output Digital: S/PDIF (RCA) 0,5V p-p / 75 ohms
Power consumption: 40W
Nominal voltage: 115V or 230V factory set for destination country only.
Mains voltage: range +/- 12%
Dimensions: 430(W) 110(H) 390(D) mm.
Shipping weight: 10 Kg.




Nessun commento:

Posta un commento