The Westminster TW is a classic horn-loaded design driven by the best in modern Dual Concentric technology. This newly revised loudspeaker is capable of truly outstanding high fidelity reproduction while remaining an imposing and traditional piece of furniture. It is based around the famous 15-inch Tannoy twin-magnet Dual Concentric driver, now with the computer designed Tulip Waveguide for truly extended high frequency performance.
Fine walnut veneers and solid walnut edgings conceal a complex horn-loaded 25 mm particle board cabinet. The horn loading system gives greatly improved efficiency and a large wavefront area approaching that from real instruments. The Westminster TW offers high frequency energy tailoring through high current gold-plated switch blocks with controls for both treble energy and roll-off. Van den Hul wiring is used throughout. Signal handling is via gold-plated terminals with captive link bi-wire/normal wiring and a hard-wired time compensated crossover network. The combination of this closely integrated mid band and single point source guarantees exceptionally realistic stereo imaging.
The Tannoy Westminster TW is effortessly capable of the realistic stereophonic reproduction of truly low frequencies and of the widest dynamic ranges.
Specifications
Power Rating: 125 watt RMS (520 watt peak)
Recommended Amplifier Power: 50 - 200 watt/channel
Sensitivity ( 2,83 V at 1 m): 99 dB
Maximum SPL: 120 dB at 1m for 125 watt RMS (126 dB at 1m for 520 watt peak)
Nominal Impedance: 8 ohm
Minimum Impedance: 5,5 ohm
Frequency Response: 18 Hz - 25 kHz , ±3 dB
Crossover Frequencies:
300 Hz acoustical;
1000 Hz electrical
Crossover Control:
±3 dB over 1 kHz to 25 kHz shelving;
+2 dB to -6 dB per octave over 5 kHz to 25 kHz slope
Crossover Type: 1st order LF; 1st order HF,
Bi-wired, hard-wired, passive, low-loss,time compensated Type 1109
Driver Type: 15-inch Dual Concentric High Compliance Type 3858
Enclosure Type: Compound horn
Enclosure Volume: 521 litre
Dimensions (H x W x D): 1290 x 1030 x 636 mm (1490 x 1080 x 680 mm packed)
Weight: 116 kg complete (132 kg packed)
Enclosure Material: Solid walnut with 25 mm particle board, crossbracing and heavy internal damping
Nessun commento:
Posta un commento