Akai's all
new front loading type cassette deck with Dolby NR system
Front
cassette loading, front control convenience. IC equipped Dolby NR
system.electronically controlled DC motor. Super hard permalloy head. Tape
Selector Sswitches for use of high grade tape.
Specifications:
Track
System: 4-track, 2-channel stereo system
Tape: Philips type cassette tape
Tape
Speed: 1-7/8 ips.
Wow and
Flutter: less than 0,08% WRMS (NAB;
0,24% (DIN 45507)
Frequency
Response:
Low Noise
tape : 35 Hz - 14,000 Hz (±3 dB)
CrO₂ Tape
: 35 Hz - 15,000 Hz (±3 dB)
FeCr Tape
: 35 Hz - 16,000 Hz (±3 dB)
Distortion: less than 1,5% using Low Noise tape (1,000 Hz
0 VU)
Signal-to-Noise
Ratio: better than 51 dB (measured via
tape with peak recording level of +3 VU)
Dolby Switch
ON: improves up to 10 dB above 5 kHz
Erase
Ratio: better than 70 dB
Bias
Frequency: 85 kHz
Heads: two - 1 x recording/playback head, 1 x erase
head
Motor: electronically speed controlled DC motor
Fast
Forward/Rweind Time: 80 sec. Using C-60
cassette tape
Output
Jack:
2 x Line :
410 mV (0 VU). Required load impedance more than 20 k Ω
Phone : 50 mV/8 Ω
Input Jacks:
Microphone
: 0,3 mV. Required microphone impedance
600 Ω
2 x Line
: 70 mV/ 100 k Ω
DIN
Jack: Input 0,3mV/ output 410 mV
Semiconductors: 24 Transistors; 25 Diodes; 2 ICs
Power
Requirements: 120 V, 60 Hz (CSA, UL, LA
models)
Other
Modeles: 110/120/220/240 (switchable)
50/60 Hz
Dimensions
(W x H x D): 400 x 165 x 300 mm
(17,3" x 6,4" x 11,8")
Weight: 6,8 kg 915,0 lbs)
Nessun commento:
Posta un commento